Question: This is the first year that I will have to moor my boat off shore in a lake. Can you tell me how this is done and what to watch out for? My boat is a 25′ power boat.
Answer: Many things depend on how you are going to get to your boat on the mooring. If there is a launch that simply drops you off, that eliminates one variable. If, however, you have a dinghy to reach the mooring, is the dinghy left there while you boat, or do you pull it behind you? The most important thing to remember when using a dinghy is not to get the dinghy painter (line) fowled in the prop of the boat.
Departing from and retrieving a mooring is much like anchoring. When departing, make sure your engine is warmed thoroughly and check other boats around you. All the boats should be pointing into the wind and/or current, whichever is greater. Make sure when you drop the mooring that you have sufficient room to get under way and establish steering control before you are blown or pushed into other boats. Plan your departure path prior to dropping the mooring. Pull forward, into the wind or current, slowly until the mooring line is slack. I am assuming that the mooring line has a float on it so when dropped it is easy to pick up. If not, you should rig one. Once you are in a position to drop the mooring line, do so and back slowly, make your turn to a path that will lead out of the mooring area and slowly motor away.
When picking up a mooring, look at the other boats first. This will tell you the direction of wind or current, whichever is stronger. Approach slowly into the wind or current and shift to neutral when close enough to pick up the mooring line. (Don’t overshoot the mark and get the mooring line fouled in the prop.) Once the mooring line is retrieved, simply attach it securely to the bow and let the wind or current set the boat back on the mooring line.